Dispense System Consumables

A chlorinated soaking powder that has been specifically designed to break down accumulated mineral build up on glassware and other food impliments routinely exposed to proteins and food compounds. Mineral build up occurs slowly over a period of time on exposed surfaces as glassware and food impliments are regularly used and washed. Regular soaking in a chlorinated poweder will minimise any mineral build up before it becomes excessive and the glassware or impliments needs to be replaced.

A sink mounted or bucket mounted multiple brush unit used for mechanical loosening of mineral and solids build up on glassware surfaces before they fully bind to the host surface. Once loosened the build up will release and wash away more efficently from exposed surfaces when the item is put through a commercial glass washer unit cycle.

This anti freeze product is rated as food grade and allows the glycol chilled water system to circulate fluids at below zero degree temperaturess without freezing the unit fluid. Auotmotive and other types of glycol are toxic and should not in any circumstances be used in a food area or beer dispense glycol chilled water system.

A concentrated alkaline based caustic fluid specifically formulated for hospitality industry beer line and beer tap cleaning. Before use, the beer line cleaning fluid should be diluted in accordance with the manufacturers instructions and once pumped into the system be allowed to soak in the beer lines for a period recommended by the chemical mnaufacturer or a brewery technician. Beer line cleaning fluid is toxic/corrosive and must always be used in conjunction with the correct safety protection equipment specified by the manufacturer i.e. safety glasses and rubber gloves.

Thirst Aid kit - A plastic compartmentalised container carrying a wide range of the common wearable seals used on tap beer dispense systems. The range covers keg coupler, beer tap, and gas cylinder seals that are most often replaced during routine maintenance. The seals provided in the kit are relatively easy to change out and will in most instances last for a reasonable period of time.

All BevTech Solutions technicians carry a comprehensive range of replacement parts and equipment for all types of beer dispense systems including gas systems, cellar equipment, beer tower and chilled water replacement parts. Beer dispense systems are reasonably logical in their design and operation making repairs relatively straight forward to repair once the fault has been located and correctly identified.